Brant, On No experience Jobs – 48 Openings This Week

CNC Operator
Weston Forest Group —Paris, ON
- Overtime
- No experience needed
- Forklift
- High school diploma or GED
8d
Industrial Cleaner Full-Time | Days (Mon-Fri) | 7AM-3PM
North West Rubber —Brantford, ON
- $20 an hour
- Overtime
- No experience needed
- Designated paid holidays
Quick apply
9d
Naval Electronic Sensor Operator
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Full-time
- No experience needed
- Dental care
- Paid time off
Ammunition Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Full-time
- No experience needed
- High school diploma or GED
- Dental care
- Paid time off
Signal Operator
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Bachelor's
- Dental care
- Paid time off
Infanteer
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Sonar Operator
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Full-time
- No experience needed
- Dental care
- Paid time off
Meteorological Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Full-time
- No experience needed
- Dental care
- Paid time off
Marine Systems Mechanical Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Combat Engineer
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Armour Soldier
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Line Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Combat Medic
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- First Aid Certification
- Dental care
- Paid time off
Marine Systems Electrical Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Dental Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Signal Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
Aerospace Control Operator
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Bachelor's
- Dental care
- Paid time off
Air Operations Support Technician
Canadian Armed Forces —Ontario
- $4,337–$6,413 a month
- Part-time
- No experience needed
- Dental care
- Paid time off
barista - Store# 53702, 218 HENRY STREET
Starbucks —Brantford, ON
- Weekends as needed
- Customer service
- No experience needed
- Tuition reimbursement
- Paid time off
Retail Store Associate Lynden Park Mall
Winners —Brantford, ON
- $17.60–$22.00 an hour
- Part-time
- No experience needed
14d

I want to receive the latest job alerts for no experience in brant, on

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

no experience jobs near brant, on

CNC Operator

Weston Forest Group -
Paris, ON

Apply Now

Job details

Full-time
8 days ago

Qualifications

WHMIS Certification
Forklift Licence
Fanuc
Calipers
No experience needed
Forklift
High school diploma or GED
Materials handling
Manufacturing
Mechanical knowledge
CNC

Full job description

KEY ATTRIBUTES:

Mechanical aptitude and confidence working with CNC equipment

Attention to detail with a focus on part accuracy, cut quality, and minimizing scrap

Ability to read and follow work orders, setup sheets, cut lists, and production drawings

Safe material handling practices for plywood and lumber

Reliable, safety-focused, and able to work independently

Comfort identifying issues and communicating them quickly

Team-oriented with a steady, production-focused work style

KEY RESPONSIBILITIES:

Machine Setup & Operation:

Set up and operate the Onsrud M Series CNC router with Fanuc controller for daily production

Load plywood sheets and wood lumber safely and accurately onto the machine

Change router bits and tooling as needed for each job

Run approved jobs and monitor machine performance, cut quality, and output

Check first-off and in-process parts to ensure they meet requirements

Unload, sort, and move finished parts to the next stage of production

Report machine issues, tooling concerns, alarms, or material problems promptly

Complete basic production records and keep the work area organized

Program Execution & Job Readiness:

Run approved CNC jobs using the Fanuc controller

Confirm the correct program, tooling, and material before each run

Follow setup sheets, work instructions, and supervisor direction

Work closely with the design department to communicate cut issues, program-related concerns, and feedback from the machine

No CNC programming or program editing is required for this role

Quality Control & Inspection:

Inspect first-off and in-process parts for size, profile, and overall cut quality

Check for tear-out, chipping, burn marks, and material defects

Use basic measuring tools such as tape measures, calipers, and squares

Separate non-conforming parts and report issues quickly

Help reduce scrap and rework through accurate setup and inspection

Tooling & Material Management:

Monitor router bit condition and change tooling when needed

Handle plywood sheets and lumber safely and carefully

Confirm the correct material type and thickness before starting a job

Support efficient material use and good offcut handling practices

Keep tooling, materials, and the work area clean and organized

Machine Maintenance & Workplace Safety:

Complete routine pre-shift checks to confirm the machine is ready to run

Keep the machine and surrounding area free of dust, chips, and offcuts

Report machine faults, poor cut performance, or maintenance concerns right away

Follow all safety procedures, including lockout/tagout where required

Wear required PPE such as safety glasses, hearing protection, and safety footwear

Maintain a safe, organized work area and report hazards promptly

Team Collaboration & Continuous Improvement:

Communicate production status, quality concerns, and machine issues clearly

Work closely with supervisors, maintenance, production team members, and the design department that creates CNC programs

Share machine-side feedback to help support accurate and efficient program execution

Contribute to safe, efficient, and consistent production

Qualifications & Requirements:

Education & Certification

High school diploma or equivalent required

WHMIS / GHS certification required or willingness to complete upon hire

Forklift certification is an asset, particularly for material handling of sheet goods and lumber

Additional health and safety training is considered an asset

Experience

Previous CNC operating experience in a manufacturing environment is required

Experience with CNC routers in wood products, millwork, cabinetry, furniture, or similar manufacturing is preferred

Experience working with plywood, softwood, and hardwood materials is an asset

Experience with Fanuc-controlled equipment is an asset

Programming experience is not required

Technical Proficiency

Ability to operate a Fanuc-controlled CNC router using approved jobs

Experience with setup tasks such as loading material and changing tooling

Ability to read drawings, cut lists, and setup instructions

Comfort using basic measuring tools for part checks

Strong awareness of safety in a wood-processing environment

Core Competencies

CNC router operation

Fanuc controller familiarity

Wood material handling

Part inspection and quality checks

Tooling changes and setup

Housekeeping and safety awareness

Clear communication and teamwork

Working Conditions, Effort & Environment

Work Conditions:

Shift-based production role; day, afternoon, or rotating shifts may be required

Overtime may be required during busy periods

Fast-paced environment with daily production goals

Physical Environment

Wood products manufacturing environment with exposure to machine noise, dust, chips, and airborne particles; required PPE must be worn at all times as applicable

Regular work around large sheet goods, lumber, moving equipment, and industrial machinery

Work area may involve standing at the machine for extended periods and moving materials to and from the CNC router and adjacent production areas

Physical Effort

Moderate physical effort required, including prolonged standing, walking, bending, reaching, and positioning materials during setup and operation

Regular handling of plywood sheets, wood components, offcuts, and tooling; lifting requirements may vary by job and may require team lifting or material handling equipment

Manual dexterity is required for tooling changes, machine adjustments, part inspection, and safe material handling

Mental Effort

Requires a consistently high level of concentration and vigilance during machine operation and in-process inspection; lapses in attention can result in scrap, machine damage, or safety incidents

Must be capable of rapidly diagnosing and responding to machine alarms, tooling failures, and unexpected dimensional deviations under production time pressure

Regularly manages competing priorities including multiple concurrent machine setups, in-process quality checks, documentation requirements, and production schedule demands

Problem-solving and critical thinking are required on a daily basis; the operator is expected to exercise sound independent judgment within the scope of their role

Apply Now

Refine Your Search

no experience jobs in brant, on

CNC Operator

Industrial Cleaner Full-Time | Days (Mon-Fri) | 7AM-3PM

Naval Electronic Sensor Operator

Ammunition Technician

Signal Operator

Infanteer

Sonar Operator

Meteorological Technician

Marine Systems Mechanical Technician

Combat Engineer

Armour Soldier

Line Technician

Combat Medic

Marine Systems Electrical Technician

Dental Technician

Signal Technician

Aerospace Control Operator

Air Operations Support Technician

barista - Store# 53702, 218 HENRY STREET

Retail Store Associate Lynden Park Mall

I want to receive the latest job alerts for no experience in brant, on

Explore jobs in more locations

Job seeker tools

Employer Tools

Browse

Stay Connected