Leamington On Cnc machinist Jobs – 6 Openings This Week

CNC Machinist
MC3 Manufacturing Inc. —Kingsville, ON
- $25–$30 an hour
- Full-time
- CAD
- Engineering
- Math
- Dental care
- Vision care
Quick apply
CNC Programmer/Operator- Afternoon Shift
Uni-Fab —Leamington, ON
- Full-time
- Basic math
- In-person
- Manufacturing
- Disability insurance
- Dental care
Quick apply
Precision Manual Machinist: Manual Lathe (3+ yrs exp required)
RWD TOOL & MACHINE LTD. —Ontario
- $36–$38 an hour
- Overtime
- Basic math
- In-person
- Manufacturing
- Disability insurance
- Dental care
Quick apply

More jobs to discover

Find similar jobs that you might be interested in.

CNC Programmer/Operator- Afternoon Shift
Uni-Fab —Leamington, ON
Understand, select and program various types of tooling based on part geometry and requirements. Read and properly interpret machining blueprints, make parts to…
Quick apply

Explore jobs in cities nearby

Check out jobs in cities near your current location, Columbus

CNC MACHINIST & TECHNOLOGIST
Dishon Limited —Vaughan, ON
This role requires strong *GD&T literacy*, a deep understanding of machining fundamentals, and the ability to interpret complex engineering drawings.
$22–$34 an hour
Quick apply
Precision Manual Machinist: Manual Lathe (3+ yrs exp required)
RWD TOOL & MACHINE LTD. —Ontario
Analyze and formulate strategies for how to repair components and assemblies. 3+ Years relevant manual machining experience. Experience turning O-ring grooves.
$36–$38 an hour
Quick apply

Show more jobs in cities nearby

I want to receive the latest job alerts for cnc machinist in leamington on

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

CNC Machinist

MC3 Manufacturing Inc.
Kingsville, ON

Quick apply

Job details

Permanent | Full-time
$25–$30 an hour

Qualifications

CNC programming
CNC lathe
CAD
Fanuc
Engineering
Calipers
Machining
Math
CNC

Full job description

CNC Machinist – Lathe, Mill & Bridge Mill Operator

The role

Good machining is about more than running a program. It’s knowing when something’s not quite right before it becomes a scrap part. It’s understanding the material, reading the drawing, and trusting your setup. The people who are good at this take quiet pride in the work – and it shows in every part that comes off the machine.

We’re looking for a CNC Machinist who can operate lathes, mills, and our AWEA LP-25YZF Bridge Mill – a large-format, 5-face machining center. If you’ve worked on big iron and know how to hold tight tolerances on heavy, complex parts, this is worth reading.

About the AWEA Bridge Mill

The LP-25YZF is a Bridge-Type 5-Face Machining Center built for large-format, high-precision work. It’s designed for the kind of parts most shops can’t handle – heavy frames, large plates, and complex custom fabrications that need to be right the first time.

5-face machining in a single setup – better accuracy, less handling
Large travel: 6,000 mm (X) × 3,200 mm (Y) × 1,000 mm (Z)
Table capacity up to 20,000 kg
Positioning accuracy ±0.015 mm; repeatability ±0.003 mm
32-tool magazine standard, up to 120; 20 kg max tool weight
22/26 kW spindle, up to 10,000 RPM
Fanuc-based control – G-Code and CAM software compatible

Experience on a machine like this is an asset. If you haven’t run one specifically but you’ve worked on large-format mills and understand 5-face work, we want to hear from you.

What you’ll be doing

You’ll be setting up and running CNC lathes, mills, and the bridge mill to produce parts across a range of materials and tolerances. You’ll read blueprints directly, load and prepare raw stock, run test cuts, and inspect your own work. Most of our jobs are short-run and custom, so you’ll be setting up new work regularly rather than running the same part all day.

Day to day

Set up and operate CNC lathes and mills for drilling, turning, milling, and grinding
Set up and run the AWEA LP-25YZF Bridge Mill for large-format, multi-face jobs
Read and interpret blueprints and mechanical drawings to understand job requirements
Translate job specs into machine commands and confirm setups before running
Load raw material and parts, and run test cuts to verify against spec
Configure machines for full production cycles on multi-part jobs
Monitor machines during operation and adjust stay on tolerance
Inspect and measure finished parts using precision instruments
Perform daily machine checks and routine maintenance
Keep your work area clean, organized, and safe

What you bring

You’ve completed an apprenticeship or have equivalent hands-on experience – you know the fundamentals, and you’ve proven you can apply them. You’re comfortable with precision measurement, you read drawings well, and you don’t need someone looking over your shoulder to produce good work.

Completed machinist apprenticeship or equivalent proven experience
Hands-on experience operating CNC lathes and mills
Experience with large-format CNC mills or 5-face machining centers is a strong asset
Familiarity with Fanuc controls and G-Code
Able to read and work directly from blueprints and mechanical drawings
Comfortable with precision measurement tools – micrometres, calipers, gauges
Basic understanding of CNC programming and CAD/CAM
Mechanically minded with solid math skills
Detail-oriented and focused on getting it right, not just getting it done
Reliable, communicates clearly, works well with a team

A diploma or certification in a machining or engineering discipline is a bonus, not a requirement. We care more about what you can do than what’s on paper.

About MC3

We’ve been building conveyors and doing custom fabrication for over 25 years. We’re a hands-on shop where skilled trades are respected, and the work is genuine. We offer health, dental, vision, and an RRSP matching program – and we promote from within.

Our values

Trust – Honest and dependable
Teamwork – We look out for each other
Performance – We do things right, not just fast
Joy – Good attitude goes a long way here

If this sounds like the kind of work you’d be proud to do, we’d love to hear from you.

MC3 Manufacturing is committed to diversity, inclusion, and accessibility. Accommodations are available throughout the hiring process as required by law.

Pay: $25.00-$30.00 per hour

Benefits:

Dental care
Extended health care
RRSP match
Vision care

Work Location: In person

Quick apply

Refine Your Search

cnc machinist jobs in leamington on

CNC Machinist

CNC Programmer/Operator- Afternoon Shift

Precision Manual Machinist: Manual Lathe (3+ yrs exp required)

More jobs to discover

Explore jobs in cities nearby

I want to receive the latest job alerts for cnc machinist in leamington on

Explore jobs in more locations

Job seeker tools

Employer Tools

Browse

Stay Connected