Overview:
À propos de Minerals Technologies Inc.
Minerals Technologies Inc. est une entreprise mondiale axée sur la technologie, spécialisée dans les minéraux et les produits dérivés. Nos solutions sont utilisées dans des secteurs essentiels tels que le papier, l’emballage, l’alimentation, les produits pharmaceutiques, les soins personnels, l’automobile, la construction, les infrastructures et plus encore.
Nous comptons plus de 150 sites à travers le monde et environ 4 000 employés. Nous plaçons la sécurité, la qualité et l’amélioration continue au cœur de nos opérations.
Résumé du poste
Sous la supervision du gestionnaire d’usine ou du superviseur de production, vous serez responsable de la fabrication du carbonate de calcium précipité (PCC) et de produits connexes destinés à l’usine de papier hôte. Vous assurerez également la qualité des produits, l’opération des équipements informatisés et la coordination des activités de maintenance.
Responsabilités principales
Production et qualité
-
Opérer les systèmes de désagrégation, carbonatation, tamisage et autres équipements contrôlés par ordinateur.
-
Effectuer les tests en laboratoire sur les produits en cours et finis.
-
Assurer la conformité des produits aux normes de qualité (SPC).
-
Gérer et tester les matières premières selon les spécifications.
-
Documenter tous les paramètres de procédé et de qualité.
Maintenance et opérations
-
Effectuer les activités de maintenance productive totale (TPM).
-
Vérifier le bon fonctionnement des équipements et suivre les calendriers d’entretien préventif.
-
Superviser les entrepreneurs externes au besoin.
-
Maintenir un environnement de travail propre et sécuritaire.
Amélioration continue (OE/Lean)
-
Participer activement aux initiatives 5S, Kaizen, gestion quotidienne, travail standardisé et résolution de problèmes.
Autres tâches
-
Effectuer toute autre tâche assignée par la direction.
Exigences
Formation et expérience
-
Diplôme d’études secondaires (DES) ou équivalent.
-
Minimum de 5 ans d’expérience en milieu industriel, laboratoire, agricole ou commercial.
-
Un diplôme technique peut réduire l’expérience requise.
Compétences et habiletés
-
Connaissance des équipements et systèmes industriels.
-
Capacité à travailler de façon autonome et en équipe.
-
Expérience Lean / Excellence opérationnelle (atout).
-
Aisance avec les outils informatiques (Excel, Word, Adobe, Oracle, Kronos, PlantWeb, etc.).
-
Capacité à diagnostiquer et résoudre des problèmes mécaniques et de procédé.
Exigences physiques
Être en mesure de : se tenir debout, marcher, se pencher, grimper, s’accroupir, pousser, tirer, soulever jusqu’à 50 lb (
- 23 kg).
-
Travailler dans des espaces confinés et à différentes hauteurs.
-
Utiliser divers outils et équipements.
-
Compléter la documentation de manière précise.
Qualités recherchées
-
Autonomie, initiative et motivation.
-
Capacité à gérer plusieurs tâches et à respecter les échéances.
-
Intégrité, professionnalisme et maîtrise de soi.
-
Excellentes habiletés interpersonnelles.
-
Capacité à apprendre et suivre les procédures et politiques de sécurité.
Conditions de travail
-
Exposition possible à la poussière, au bruit, aux hauteurs, aux espaces confinés et aux conditions climatiques extérieures.
-
Travail principalement seul, parfois en équipe, à proximité d’équipements en fonctionnement.
Horaire
-
Quart de jour : 6 h 30 à 15 h 00, du lundi au vendredi.
-
Possibilité d’heures supplémentaires, fins de semaine, jours fériés, garde et rappels au travail.
-
L’horaire peut être modifié selon les besoins opérationnels.
Équipement de sécurité fourni
-
Cadenas de cadenassage (LOTO)
-
Casque de sécurité (ANSI)
-
Lunettes de sécurité avec protections latérales
-
Chaussures/bottes de sécurité à embout d’acier
-
ÉPI additionnel selon les tâches
Formation en santé et sécurité
Formation complète offerte, incluant :
-
Communication des dangers
-
Protection respiratoire
-
Sécurité électrique
-
Cadenassage
-
Sécurité des machines
-
Procédures d’urgence et d’évacuation
-
Premiers soins et prévention des blessures
-
Modules en ligne et formation en classe / sur le terrain
Des formations additionnelles sont offertes lors de changements de tâches ou selon les exigences réglementaires.
Prêt à postuler?
Nous recherchons une personne motivée, rigoureuse et orientée vers la qualité pour joindre notre équipe. Postulez dès maintenant pour faire partie d’une entreprise mondiale en pleine croissance.
Responsibilities:
Minerals Technologies Inc. is a global, technology-driven specialty minerals company that develops, produces, and markets a wide range of minerals and mineral-based products and services.
Our products are an essential part of everyday life for millions of people around the world. They are used in consumer goods in paper and packaging, food and pharmaceuticals, household and personal care, pet care, automotives, and many more, as well as in industrial settings like steelmaking, metalcasting, construction, infrastructure, and wastewater remediation.
We are listed on the New York Stock Exchange under the ticker symbol MTX, headquartered in New York City, and have over 150 locations worldwide, with ~4,000 employees in 34 countries and 12 R&D centers.
We put people at the center of everything we do - working safely, communicating openly, and managing our resources and businesses responsibly.
What We Offer:
-
Highly attractive pay in a skill-based structure
-
World Class Supplemental Health/Dental plans
-
Life Insurance
-
Employee Assistance Plan
-
Paid vacation & holidays
Summary
Under the supervision of the Plant Manager or Production Supervisor, manufactures precipitated calcium carbonate and other related products for use by the host paper mill, or others, by performing the following functions: 1) all duties in regard to the SMI Quality System pertinent to the position, 2) operates the process computer-controlled slaking, carbonating, screening, and related equipment, 3) verifies and maintains product quality by performing various lab tests, 4) oversees maintenance and outside contractor activities in respect to production requirement.
Under the supervision of the Plant Manager performs the following functions:
Within the guidelines of the Quality Management System:
-
Maintains routine contact with host mill personnel regarding current quantity and quality needs.
-
Maintains proper records and documentation of all process and quality parameters/tests.
-
Manages, tests, and identifies incoming crude materials and lab materials for adherence to specification, either by actual testing or by review of the material's Certificate of Analysis.
-
Manufactures all in-process materials and products by computer control in compliance with Work Instructions.
-
Conducts all in-process and final product testing in accordance with established, approved procedures.
-
Assures that product meets quality standards by controlling processes, utilizing statistical process control (SPC) techniques.
-
Conducts routine calibrations of laboratory instruments and conducts routine calibrations/standardizations of process instrumentation in accordance with established, approved procedures and schedule.
-
Controls and corrects non-conforming in-process material and final products in accordance with written procedure.
-
Release for further processing and final products for shipment to the customer in accordance with written procedure.
-
Understands and uses statistical techniques where appropriate.
-
If contacted by the customer, initiates the documentation of a customer concern in accordance with the customer Concern Procedure.
Maintains a clean work area.
Works in a safe manner, adhering to Safety Policies and local regulatory requirements.
Perform Total Productive Maintenance activities as required. Assures that equipment is operating correctly. Follows preventive maintenance activities according to schedule and corporate standards.
Oversees outside contract labor as required.
Participates in continuous training pertinent to the position.
OE/Lean
-
Actively participates in the implementation of sustainable improvement processes, such as 5S, Kaizen, Daily Management Control, Standard Work and Problem Solving.
Other Duties and Responsibilities
-
Performs other duties as required.
Note: Management reserves the right to assign or reassign duties and responsibilities to this job at any time.
Qualifications:
Qualifications/Requirements
The requirements listed in the sections that follow are representative of the knowledge, skills and/or abilities required to perform the duties of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions (primary duties) of the job.
Education and Experience
-
High school diploma or equivalent required.
-
Minimum of five (5) years of experience in an industrial, laboratory, agricultural, or business environment required.
-
Candidates possessing a technical degree may qualify with fewer years of relevant experience.
Knowledge, Skills, and Abilities
-
Demonstrated knowledge of industrial equipment and systems.
-
Proven ability to work effectively in a self-directed, team-oriented environment.
-
Lean or Operational Excellence experience strongly preferred.
-
Working knowledge of computer systems and the ability to learn, use, and troubleshoot company-supported software applications, including but not limited to: Excel, Word, Adobe, Outlook, Oracle, Kronos, and PlantWeb.
While performing the duties of this position, the employee is regularly required to:
-
Exert physical stamina and strength throughout the work shift.
-
Stand, walk, bend, squat, climb, reach, crouch, kneel, twist, push, and pull.
-
Perform repetitive motions and coordinate physical movements.
-
Work in confined spaces and at varying heights.
-
Lift and move materials weighing up to and including 50 pounds.
-
Demonstrate manual dexterity and operate a variety of tools and equipment.
-
Visually inspect equipment and work areas.
-
Accurately complete required documentation and shift records.
-
Identify, analyze, troubleshoot, and resolve equipment and process issues using sound judgment and mechanical aptitude.
-
Respond quickly to changing conditions and determine when additional resources are necessary.
-
Communicate effectively and collaborate with others, while also working independently.
-
Monitor, adjust, and maintain equipment and related processes.
-
The ability to train, coach, and transfer job-related knowledge to others is preferred.
Under limited supervision, the employee is expected to:
-
Be highly motivated, self-directed, and proactive.
-
Demonstrate persistence and initiative to complete assigned duties without direct prompting.
-
Adapt to changing priorities, work assignments, and operational needs.
-
Effectively multitask, prioritize responsibilities, and manage time efficiently to meet deadlines.
-
Exhibit a high level of integrity, dependability, professionalism, and emotional self-control.
-
Maintain a cooperative attitude and strong interpersonal skills.
-
Learn, understand, and consistently follow all company policies, job-specific procedures, and safety requirements.
-
Participate in and utilize all required training programs.
Travel
-
Availability for occasional travel as a technical resource (interplant support and training) is required.
Working Conditions
-
The role involves regular exposure to dust, loud noise, elevated work areas, confined spaces, low and bright lighting, and varying outdoor weather conditions.
-
Employees may work independently or as part of a team in close proximity to others and operational equipment.
Work Hours
-
This position operates on two shifts:
-
7:00 AM to 5:00 PM
-
9:00 AM to 7:00 PM
-
The company reserves the right to modify work schedules based on business needs.
-
Flexibility to work either shift is required.
Safety Equipment
Required safety equipment may include:
-
Personal lockout/tagout (LOTO) lock
-
ANSI-approved hard hat
-
Safety glasses with side shields
-
Steel-toed safety shoes or boots
Additional personal protective equipment (PPE) will be provided as needed based on job assignment or employee preference.
Safety Training
New employees will receive comprehensive New Employee Safety Training from a qualified individual, which may include classroom instruction, on-the-job training, and online learning modules. Training topics may include, but are not limited to:
-
Hazard communication
-
Hearing conservation
-
Respiratory protection
-
Electrical safety
-
Lockout/tagout procedures
-
Personal protective equipment
-
Bloodborne pathogens
-
Fire safety and extinguisher use
-
Machine safety
-
Incident and near-miss reporting
-
Emergency and evacuation procedures
-
First aid and back injury prevention
-
Job- and work-area-specific procedures
Employees transferring into this position will receive New Task Training until competency is demonstrated. Additional training will be provided when job duties or tasks change in a manner that affects health or safety.
Refresher safety training will be conducted as required by management or in accordance with CNEEST regulations.
